Anbieter: Istar Dental Supply

Dental Autoclave Sterilizer, 4.3’’ Colour Screen, Fully Automatic Autoclave Machine For Dental Clinic, 18L/23L

1.279,89 €~~2.037,28 €~~37% OFF

Volume: 18L

18L23L

Beschreibung

Features:

4.3 inch TFT colour screen

Precise touch screen control, simple, innovative and practical.

Intelligent monitoring and diagnosis system

Real-time monitoring of the entire sterilization operating system. Once a fault occurs, the intelligent diagnosis system can find the faulty parts in sections, and can directly retrieve the fault information and simple solutions, so that the repair accuracy reaches 100%, making maintenance more convenient. This intelligent diagnosis system is like a "real technical character" with real-time diagnosis and intervention capabilities.

Good traceability

Standard large-capacity storage to realize automatic storage and retrieval of sterilization data. An optional external thermal printer can automatically print the sterilization data and sterilization results after each sterilization program is completed.

Preheating system

The preheating standby function keeps the temperature above the minimum temperature at all times, making the program run faster and more energy-efficient.

Super large air-conditioning heat dissipation window

260x142mm open heat storage, strong power, 73 layers of heat dissipation aluminum plate and 18 heat dissipation pipes, efficient condensation, ensure that hot water is instantly cooled to normal, and protect the drainage channel.

Quick drainage system

The imported quick interface, located at the front of the sterilizer, makes the work of adding water and draining water extremely simple and fast. Moreover, the water gate is automatically discharged directly, which effectively prevents the pollution of the internal water system of the chrysanthemum destroyer. Not only that, it can also be equipped with an automatic water filling system to realize automatic water supply from the external water tank.

Futuristic handle

Give you a different visual experience, enjoy the technology comfortably.

Built-in open water tank

The 3.5L large-capacity water tank can meet the water needs of 5 sterilization cycles. The fully open water tank can be monitored and easily cleaned. It is easy to check the water quality in the tank and facilitate daily cleaning and disinfection.

Parameter:

Applicable voltage	220-240 VAC-50/60Hz, single-phase voltage
Rated voltage	220V, 50Hz
Maximum current	10A
Maximum altitude	Altitude 2000 meters
Maximum working pressure	2.5 Bar(250 kPa)
Minimum working pressure	-0.9 Bar(-90 kpa)
Minimum atmospheric pressure	0.7bar
Maximum temperature	<145°C
Dimensions	585x438x405mm(Novo Pro 18L) 685x438x405mm(Novo Pro 23L)
Full load weight	≈50 kg(Novo Pro 18L) ≈60kg(Novo Pro 23L)
Safety threshold	2.45 bar (compliant with YY0154-2013 and YY/T0157-2013)
Vacuum degree	>-0.08Mpa
Noise level	<80 DB
Total volume of the pot	245 mm xD355 mm(Novo Pro 18L) 245 mmxD445 mm(Novo Pro 23L)
Usable pot volume	198 mmx204mmx319mm(Novo Pro 18L) 198 mmx204mmx385mm(Novo Pro 23L)
Steam filter	Filtration efficiency of particles above 0.3μm is not less than 99.5%
Water quality requirements	EC(conductivity <15uS/cm)
Average water consumption per cycle	Novo Pro 18L:0.15L(minimum) 0.26L(maximum) Novo Pro 23L:0.17L(minimum)0.31L(maximum)
Water tank volume	Water tank 3.5L

Procedures	Load Types	Sterilization Type	Temperature (℃)	Sterilization Time (Minutes)	Drying Time (Minutes)
Solid Instruments	Solid Instruments	S	134/121	10/30	9
Rapid Sterilization	Emergency Sterilization Of Bare Instruments/Rubber	S	134/121	4/20	4
Porous Instruments	Solid And Hollow Loads, Cotton Ball Fabric	B	134/121	5/20	18
Wrapped Instruments	Cotton Ball Fabric, Wrapped Instruments, Hollow Loads	B	134/121	18/30	18

Precautions:

1. Do not add any water with chemical or similar ingredients to the steriliser.
2. Do not sterilise volatile substances, toxic materials or other unsuitable equipment.
3. Do not place the steriliser in direct sunlight.
4. Do not place the steriliser on heat sensitive surfaces.
5. Cleaning with unsuitable materials.
6. Misuse the steriliser.
7. Use the steriliser in an area where it is likely to come into contact with flammable materials or gases.
8. In order to ensure the quality of sterilisation of instruments after 6 months of use or 200 cycles of operation, please replace the air filter in a timely manner.

Troubleshooting:

Error Code	Cause Of Error	LCD Prompt Message	Solution
CODE1	The pressure did not reach the set value after heating up and boosting for 30 minutes	Error: 01 Slow heating	1. Steam generator is damaged 2. Severe air leakage in the cabin door 3. The balance valve is incorrectly opened 4. The drainage valve is incorrectly started 5. The voltage is seriously low
CODE2	In the process of heating up or sterilization, the pressure is greater than the set pressure	Error: 02 Too much pressure	1. The internal temperature sensor is faulty 2. The vacuum pump is faulty 3. The solenoid valve leaks Altitude setting error
CODE3	Door opening detected during operation	Error: 03 Door lock is open	1. Door lock switch is not good 2. Clearance between hatch and pan body
CODE4	The pressure is less than the set pressure in the process of heating up or sterilization	Error: 04 Pressure is too low	1. The internal temperature sensor is faulty 2. The solenoid valve leaks Altitude setting error
CODE5	In the vacuum process, the exhaust within 20 minutes (the first vacuum is 30 minutes) failed to reach 20kpa, and the exhaust failed to reach 20kpa in 25 minutes after the completion of sterilization	Error: 05 Abnormal pressure relief	1. The altitude setting is incorrect 2. The pipe is blocked Defective solenoid valve
CODE6	The vacuum process failed to reach -0.4bar for 5 minutes, and the leak test failed to reach -0.6bar	Error: 06 Slow vacuum speed	1. Poor seal 2. The vacuum pump is faulty 3. The altitude setting is incorrect 4. Defective solenoid valve
CODE7	Ambient atmospheric pressure < 0.7bar was detected	Error: 07 Low ambient pressure	1. The altitude setting is incorrect 2. Pressure sensor failure
CODE8	Door lock switch logic detection error	Error: 08 Door opening error	1. The door opening switch is broken 2. Poor motor
CODE9	Motor running error	Error: 09 Closed the door incorrectly	1. The door close switch is broken 2. Poor motor
CODE10	Preheat for 20 minutes, the wall temperature < 100 degrees Celsius, the generator temperature < 110 degrees Celsius	Error: 10 Full preheat	1. Bad steam generator 2. Bad heater
CODE11	The temperature exceeds the theoretical +2 degrees or exceeds the maximum required by the specification during the heating and pressure boost or sterilization process	Error: 12 The temperature is too high	1.The internal temperature sensor is faulty 2. The voltage is abnormal 3. The vacuum pump is faulty 4. Solenoid valve leakage
CODE12	In the process of heating up or sterilization, the temperature is lower than the theoretical temperature of -2 degrees or exceeds the minimum required by the specification	Error: 12 The temperature is too low	1. The internal temperature sensor is faulty 2. Voltage anomaly
CODE13	Add water more than 3 minutes for low water level, or less than 4.5 minutes	Error: 13 The time for adding water exceeds the limit	1. The water pump is damaged 2. The water level switch is broken 3. The device does not support automatic water addition 4. Check the configuration bit