Dental Dry Suction Machine Vacuum System, Support 3 PCS Dental Unit Chair

ISTAR Dry Suction Machine is a classic medical equipment. 
ISTAR Dry Suction Machine is used in the oral treatment process. It can suck out foreign objects attached to eubacteria, such as oral secretions and dirty blood. And it can also protect the oral environment before suctioning. Usually dental suction pumps are equipped with oral treatment machines.

Features:

High-performance pump with powerful suction

Equipped with a powerful dental dry vacuum pump, it provides strong, reliable suction to keep the treatment area clean and prevent cross infection.

Compact, space-saving design

ISTAR dental dry suction machine is small and easy to install, and will not take up valuable space in the treatment room, making the workspace more organized.

Low-noise motor, Class F insulation

This vacuum system uses a Class F insulation motor, which runs quietly and creates a more comfortable environment for patients and dental staff.

Durable, corrosion-resistant construction

ISTAR dental dry suction system made of high-quality engineering plastics, it is corrosion-resistant and can ensure long-lasting durability even after frequent exposure to moisture and various dental materials.

Parameter:

Recommended use	1-3 dental unit
Suction flow	600L/min
Total power	750 (w)
Current	5.5(A)
Voltage	110~230 (V)
Frequency	50/60Hz (Hz)
Size	45*45*65 (cm)
Negative pressure	>1.2 (-Kpa)
Noise	45-50dB
Weight	42kg

Troubleshooting:

Fault	Possible Cause(s)	Solution(s)
The suction machine does not work	No power supply	Check power supply and replace it with a new one
	Power switch off	Turn on switch of the suction machine
	Power cable is not  connected properly	Connect the cable
	Fuse blow out	Change the fuse
	Suction machine control switch failure	Check the control switch and replace it
Suction pump demonstrates low level of suction power	The internal diameter of suction pump tube is too small	Choose a suitable pipe for the suction machine
	The horizontal deviation   between the suction pump tube and the suction machine is too large	Increase the height of the pump tube and lower the height of suction machine
	Pump line is too long	Adjust the space between the    suction machine and the dental treatment machine
	Air leak in the pipeline (leakage)	Check the pipeline and clean the leakage

Circuit diagram:

Installation:

①This vacuum machine is installed in a well-ventilated room or outdoors where there is no sun or rain. Please check the pipeline link thoroughly.

②Connect gas-liquid pump pipe.

The inlet of the suction machine is connected to the vapor-liquid traction hose connector with a diameter of ø32mm or ø50mm, and the pipe connector is fixed with a copper sleeve.

③Connection of Discharge pipe

The mercury separator of the suction machine is connected to the ø32mm discharge traction hose connector, and the pipe connector is fixed with a copper sleeve.

④Connect the exhaust pipe of the suction machine to the outdoor pipe.

⑤Electrical connections.

⑥Plug in the power plug of the suction machine with a grounding system.

⑦Connect the control cable between the suction machine and the dental machine.