Anbieter: Istar Dental Supply
Dental High Dry Volume Suction Device, Support 2 PCS Dental Unit Chair
Beschreibung
ISTAR Dry High Volume Suction Device is a classic medical equipment.
ISTAR Dental Dry High Volume Suction Device is used in the oral treatment process. It can suck out foreign objects attached to eubacteria, such as oral secretions and dirty blood. And it can also protect the oral environment before suctioning. Usually dental suction pumps are equipped with oral treatment machines.
Features:
Premium Motors from Reputable Brands
The ISTAR vacuum suction device uses authentic motors from trusted manufacturers to provide reliable performance and long life in the dental environment.
Space-Saving Compact Build
The ISTAR dental suction device has a compact design that can be easily installed in any treatment room and optimize space without sacrificing functionality.
Strong, Steady Suction Power
The high volume dental suction device provides consistent, powerful suction to improve patient comfort and ensure smooth, efficient dental procedures.
High-Quality German Bearings for Quiet, Smooth Operation
The dental vacuum device is equipped with German-made bearings for quiet, reliable performance and extended motor life.
Eco-Friendly, No-Water Operation
This dental suction device does not require a water connection to operate, saving resources and providing an environmentally friendly solution with zero water consumption.
Parameter:
| Recommended use | 1-2 dental unit |
| Suction flow | 400L/min |
| Total power | 550 (w) |
| Current | 4.5(A) |
| Voltage | 110~230 (V) |
| Frequency | 50/60Hz (Hz) |
| Size | 38*34*60(cm) |
| Weight | 21kg |
| Package size | 45*45*65(cm) |
| Package weight | 42kg |
| Negative pressure | >1.1 (-Kpa) |
| Noise | 45-50dB |
Troubleshooting:
|
Fault |
Possible Cause(s) |
Solution(s) |
|
The suction machine does not work |
No power supply |
Check power supply and replace it with a new one |
|
Power switch off |
Turn on switch of the suction machine |
|
|
Power cable is not connected properly |
Connect the cable |
|
|
Fuse blow out |
Change the fuse |
|
|
Suction machine control switch failure |
Check the control switch and replace it |
|
|
Suction pump demonstrates low level of suction power |
The internal diameter of suction pump tube is too small |
Choose a suitable pipe for the suction machine |
|
The horizontal deviation between the suction pump tube and the suction machine is too large |
Increase the height of the pump tube and lower the height of suction machine |
|
|
Pump line is too long |
Adjust the space between the suction machine and the dental treatment machine |
|
|
Air leak in the pipeline (leakage) |
Check the pipeline and clean the leakage |
Circuit diagram:
Installation:
①This vacuum suction device is installed in a well-ventilated room or outdoors where there is no sun or rain. Please check the pipeline link thoroughly.
②Connect gas-liquid pump pipe.
The inlet of the suction device is connected to the vapor-liquid traction hose connector with a diameter of ø32mm or ø50mm, and the pipe connector is fixed with a copper sleeve.
③Connection of Discharge pipe
The mercury separator of the suction device is connected to the ø32mm discharge traction hose connector, and the pipe connector is fixed with a copper sleeve.
④Connect the exhaust pipe of the suction device to the outdoor pipe.
⑤Electrical connections.
⑥Plug in the power plug of the suction device with a grounding system.
⑦Connect the control cable between the suction device and the dental machine.
