Vacuum Dental Suction Machine, Dental Dry Suction Unit, Support 4 PCS Dental Unit Chair

ISTAR Suction Machine is a classic medical equipment. 
ISTAR Suction Machine is used in the oral treatment process. It can suck out foreign objects attached to eubacteria, such as oral secretions and dirty blood. And it can also protect the oral environment before suctioning. Usually dental suction pumps are equipped with oral treatment machines.

Features:

High-Quality Motors from Trusted Brands

ISTAR vacuum dental suction machine equipped with genuine motors sourced from well-known brands, ensuring dependable performance and durability in dental practices.

Compact Design for Space Efficiency

This suction unit’s small size makes it easy to install in any treatment room, saving valuable space while maintaining high functionality.

Powerful and Consistent Suction

The dental suction device provides strong, stable suction power that enhances patient comfort and supports efficient dental procedures.

Precision German Bearings for Smooth Operation

The ISTAR vacuum suction motor features German-engineered bearings, which contribute to reliable, quiet operation and long-lasting performance.

Water-Free Operation

ISTAR dental dry vacuum suction machine requires no water connection, helping conserve resources and making it an eco-friendly choice with zero water waste.

Parameter:

Recommended use	1-4 dental unit
Suction flow	1200L/min
Total power	940 (w)
Current	5.4 (A)
Voltage	110~230 (V)
Frequency	50/60Hz (Hz)
Size	52*52*75 (cm)
Factory preset vacuum	-18(-Kpa)
Weight	50kg

Troubleshooting:

Fault	Possible Cause(s)	Solution(s)
The suction machine does not work	No power supply	Check power supply and replace it with a new one
	Power switch off	Turn on switch of the suction machine
	Power cable is not  connected properly	Connect the cable
	Fuse blow out	Change the fuse
	Suction machine control switch failure	Check the control switch and replace it
Suction pump demonstrates low level of suction power	The internal diameter of suction pump tube is too small	Choose a suitable pipe for the suction machine
	The horizontal deviation   between the suction pump tube and the suction machine is too large	Increase the height of the pump tube and lower the height of suction machine
	Pump line is too long	Adjust the space between the    suction machine and the dental treatment machine
	Air leak in the pipeline (leakage)	Check the pipeline and clean the leakage

Circuit diagram:

Installation:

①This vacuum machine is installed in a well-ventilated room or outdoors where there is no sun or rain. Please check the pipeline link thoroughly.

②Connect gas-liquid pump pipe.

The inlet of the suction machine is connected to the vapor-liquid traction hose connector with a diameter of ø32mm or ø50mm, and the pipe connector is fixed with a copper sleeve.

③Connection of Discharge pipe

The mercury separator of the suction machine is connected to the ø32mm discharge traction hose connector, and the pipe connector is fixed with a copper sleeve.

④Connect the exhaust pipe of the suction machine to the outdoor pipe.

⑤Electrical connections.

⑥Plug in the power plug of the suction machine with a grounding system.

⑦Connect the control cable between the suction machine and the dental machine.