Anbieter: Istar Dental Supply

VRN® Ultrasonic Periodontal Therapy System, Ultrasonic Scaler & Air Polisher 2 in 1

Name: VRN® Ultrasonic Periodontal Therapy System, Ultrasonic Scaler & Air Polisher 2 in 1
Brand: Istar Dental Supply
SKU: GLWR-DQ40-01
Price: 712.41 EUR
Availability: InStock

712,41 €~~1.201,17 €~~40% OFF

Beschreibung

Function Integration: The ultrasonic periodontal therapy system combines the two functions of tooth cleaning and sand blasting into one, which is powerful and has a wide range of application scenarios.

Touch Screen Adjustment: The ultrasonic periodontal therapy system five functions can be converted, touch screen adjustment, fast and convenient.

Intelligent Identification Of Working Mode: The ultrasonic periodontal therapy system adopts microprocessor chip, supports intelligent control, automatic identification mode can recognize ultrasonic/sandblasting cleaning mode according to the selected working handle.

Two-Stage Sandblasting Handle Design: Ensure the separation of water and air, eliminating the cumbersome multi-part disassembly structure. Impermeable and moisture-proof, easy to maintain, long service life.

New Piping Structure: The new optimized piping structure of the ultrasonic periodontal therapy system reduces fluid pressure loss, and the five seal structure effectively removes plaque, pigment and calculus.

More Efficient Sandblasting: The anti-clogging sandblasting handpiece adopts a 0.7mm small diameter sandblasting nozzle, precision-built from German steel, to ensure reliability and durability, and prevent clogging and moisture intrusion.

Lightweight And Humanized: The combination of technology and art leads to a new field of air polishing. The ultrasonic periodontal therapy system weighs only 2.1 kg. The wireless footswitch makes it easy to operate.

Parameter:

Input voltage	230V~, 50/60Hz,0.3A
Supply voltage	25V~, 50Hz 1.3A
Input power	35VA
Wireless foot switch battery	AA batteries*2
Output half-excursion force	Minimum, 0.1N. deviation-50% Maximum,5N. deviation+50%
Tip vibrating frequency	30kHz±5kHz
Tip output power	3W~20W
Intake Pressure	5 bar-6 bar (0.5MPa-0.6MPa)
Water temperature of powder spray system	0°C-45°C
Receiving Sensitivity	-114 dB(in accordance with China National Telecommunication Law)
Receiving frequency	2.4G-2.5G
Wireless foot switch	transmission frequency: 2.412GHz-2.462GHz modulation type: GFSK
Max Radiation power	12dbm

Installation:

1. Open the package, check whether all items of the device are complete according to the packing list, and place the main unit on a stable plane facing the operator.

2. Insert the external air pipe (black) connector into the air intake connector on the back

of the main unit: press the snap ring first and then insert the air inlet connector. Insert the powder tank into the position of powder tank above the main unit.

3. Fill a proper amount of water into the transparent water bottle, and insert the water bottle

into the sink seat above the main unit.

4. Insert the wired foot switch plug into the wired foot switch socket.

5. Insert the ultrasonic handpiece and air polishing handpiece into the corresponding handpiece

tail wire, and place the ultrasonic handpiece on the left bracket of the main unit, and place

the air polishing handpiece on the right bracket.

6. Turn off the power switch on the main unit, then insert the output plug of the power adapter

into the DC power supply socket on the back of the main unit, and insert the input plug of the

power adapter into the～220V network power supply.

Troubleshooting:

Fault	Possible cause	Solutions
The device can not run	The power cord is not plugged in	Check the power plug
	The fuse in the power supply is broken	Replace the fuse (Replace the T1AL 250 V under the guidance of the manufacturer's designated person)
	The battery of foot switch battery is drained	Replace the battery
	The foot switch fails	Refer to the wireless foot switch code pairing method to re-code the code
	Poor connection of foot switch(wired)	Plug in the foot switch
No ultrasonic vibration	The tip hasn't been screwed on to the handpiece tightly	Screw the tip on the handpiece tightly by wrench
	The tail wire is loose from the board connector	Contact local dealer or our company
	Handpiece failure	Pull out handpiece and contact us or anthorized dealers
	Tail wire failure	Contact local dealer or our company
The tip vibrates but does not atomize	The amount of water volume is too little	Adjust the water volume to a higher grade
The tip vibrates but does not atomize	The power is too little	Turn up the power
The handpiece still comes out of water after the power is turned off	Electromagnetic valve failure	Contact local dealer or our company
Heating handpiece	The amount of water volume is too little	Adjust the water volume to a higher grade
Heating handpiece seriously	Handpiece failure	Pull out handpiece and contact local dealer or our company
The amount of water volume is too little	The amount of water volume is too little	Adjust the water volume to a higher grade
The amount of water volume is too little	Waterways are blocked	Unblock waterways with three-purpose guns
The tip vibrates weakly	The tip is loose	Screw the tip tightly
	The connection between The handpiece and the tail wire socket is not dry	Dry the connection between the handpiece and the tail wire with hot air
	Excessive wear of the tip	Replace the tip
Water seeps from the connection between the handpiece and the tail wire socket	The waterproof O-ring is damaged	Replace the waterproof O-ring
File can not vibrate	Loose Clamping nut is loose	Screw the nut tightly
File can not vibrate	The root canal clamp holder is damaged	Replace the root canal clamp holder
Leakage ofliquids/ gases under the device	The inner tube is broken	Contact local dealer or our company
Air polishing without powder, air or water	No air or water	Contact local dealer or our company
Air polishing without powder, air or water	The handpiece or nozzle is clogged	Pull out the handpiece and check the sandblasting tail wire for air or sand spray. If sand powder, air and water can be sprayed, please use a steel wire to unclog the handpiece and put it in a washing machine for cleaning.
No powder and water, but air spray	No powder	Check if there is too much or toolittle powder in the powder tank
	No water	Check if there is water in the water bottle
	The powder is damp	Empty and dry the powder tank, then refill it with dry powder